产品认证
文章正文
防火门UL认证 - UL 10C:门配件的防火测试
 
 
防火门UL 认证 - UL 10C:门配件的防火测试
 
 
UL 认证简称:
 
UL认证是为市场得到具有相当安全水准的商品,为人身健康和财产安全得到保证作出贡献。就产品安全认证作为消除国际贸易技术壁垒的有效手段而言,UL为促进国际贸易的发展也发挥着积极的作用。
 
防火门UL认证 – UL 10C标准名称:
 
UL 10C Standard for positive pressure fire tests of door assemblies
UL 10C 针对门配件的正压防火测试
 
防火门UL认证 – UL 10C-标准范围:
 
本标准的防火测试方法适用于活跃式的门配件,包括门框的光与面板,各种材料和用于建筑墙的各种防堵消防通道材料。该测试方法没有提供旋转门大组件中的小部件评估,或使用在电梯入口的部件。
 
防火门UL认证 – UL 10C-涵盖范围:
 
-  These methods of fire tests are applicable to door assemblies, including door frames with lights and panels, of various material and types of construction for use in wall openings to retard the passage of fire. the method does not provide an evaluation of a swinging door assembly when that assembly as part of a larger assembly(e.g. sliding fire door assembly),or when it is intended to be used as an elevator entrance.
-  Tests made in conformity with these test methods are intended to register performance during the test exposure; but such tests shall not be construed as determining suitability for use after exposure to fire.
- It is the intent that tests made in conformity with these test methods allow for the development of data to enable regulatory bodies is determine the suitability of door assemblies for use in locations where fire resistance of a specified duration is required.
- These methods are intended to evaluate the ability of a door assembly to remain in an opening during a predetermined test exposure.
- The tests expose a specimen to a standard fire exposure controlled to achieve specified temperatures throughout a specified time period, followed by the application of a specified standard fire hose stream, the exposure, however is not representative of all fire conditions , which vary with changes in the amount, nature, and distribution of fire loading , ventilation, compartment size and configuration, and heat sink characteristics of the compartment, it does, however provide a relative measure of fire performance of door assemblies under these specified fire exposure conditions.
 
防火门UL认证 – UL 10C-标准概述:
 
根据标准规定的性能测试方法出具测试报告,报告中显示指定的时间下的耐火性能,如下:20min30min60min90min120min等等。测试报告应包括试验炉的温度测量,选定未暴露的面进行测量,其中也包括所有装备性能的观察和记录。
 
防火门UL认证 – UL 10C-标准时间温度曲线:
 
暴露的门系统根据标准规定控制时间温度,不同时间不同温度显示如下:
1000°F (538°C) at 5 min
1462°F (795°C)at 20 min
1550°F (843°C) at 30 min
1700°F (927°C) at 1 h
1850°F (1010°C) at 2 h
2000°F (1093°C) at 4 h
其他更多时间
 
防火门UL认证 – UL 10C-相关参考标准
 
- GB /T 9779复层建筑涂料
- GB /T 9978建筑构件耐火试验方法
- BS 476-20:建筑材料和构件的防火测试.20部分:建筑构件耐火的测试方法(一般原理)
- BS 476-21:建筑材料和构件的防火测试.21部分:承重构件耐火的测试方法
- BS 476-22:非载荷建筑元件防火测试方法
- EN 13501-1: 建筑制品和构件的火灾分级第一部分:用对火反应试验数据的分级
- DIN 4102-1: 建筑材料和构件的防火性能第一部分:建筑材料要求和测试的分类等级
- NF P 92-501: 法国材料阻燃防火测试M等级测定-刚性材料(M0,M1,M2,M3,M4
- NF P 92-503: 法国材料阻燃防火测试M等级测定-柔性材料(M0,M1,M2,M3,M4
- BS 476: 建筑材料阻燃测试,防火测试
 
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
Copyright EcoSafene   备案号:闽ICP备09009213号-1