物理安全检测
文章正文
架高地板-性能规定测试
架高地板-性能规定测试--测试标准
MOB PF2 PS/SPU Platform floors (raised access floors) - performance specification  
架高地板-性能规定

检测项目及方法
T 1.00凹度或凸度、Concavity or convexity
T 2.00扭曲、Twist
T 3.00板的方度Panel squareness
T 4.00板边沿衬条拉拔强度(仅适用有衬条的板) Pull off strength of edge strip(when panel has edge strip)
T 5.00支架自由度测试Test for free play in pedestal
T 6.00空气渗透速率Air leakage rate
T 7.00 300×300mm负载测试(仅适用轻,中承重等级) 300mm Square Loading Test(applies to Light&Medium Grades only)
T 8.00 25×25mm点载荷测试25mm Squareness Point Loading Test
T 8a.00  25×25mm切边点载荷测试 25mm Squareness Point Loading Test on Perimeter Cut Panel Edge
T 9.00四点承载测试(只适用于超重级) Four Point Loading Test(applies to Extra Heavy Grades only)
T 10.00均布载荷测试Uniformly Distributed Load Test
T 11.00安全因素载荷测试Safety Factor Load Tests
T 12.00软体冲击测试Soft Body Impact Test
T 13.00硬体冲击测试Hard Body Impact Test
T 14.00支架动态载荷Pedestrian dynamic load test
T 15.00支架强度-水平负载Pedestal Strength – Horizontal Load
T 16.00支架强度-垂直负载Pedestal Strength – Vertical Load
T 17.00温度影响Effect of temperature
T 18.00湿度影响Effect of humidity
T 19.00表面火焰传播测试及性能指数Determination of Surface spread of flame and index of performance
T 20.00小型火测试Small Scale Fire Test
T 20a.00热学性能Thermal properties
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
Copyright EcoSafene   备案号:闽ICP备09009213号-1