物理安全检测
EN 636胶合板—规范
EN 636胶合板—规范—测试标准
EN 636 Plywood - Specifications
EN 636胶合板—规范
EN 636胶合板—规范—测试范围
This European Standard specifies the requirements for plywood, as defined in EN 313-2, for both general purpose use (non-structural application) and structural application in dry, humid or exterior conditions. It also gives a classification system based on the bending properties. The values listed under Clause 4 relate only to product properties; they are not 'characteristic values' and are not to be used in design calculations. Additional information on supplementary properties for certain applications is also given.
本标准规定了EN 313-2中定义的胶合板的要求，用于一般用途(非结构应用)和干燥、潮湿或外部条件下的结构应用。并给出了基于弯曲特性的分类体系。第4条下列出的值仅与产品属性有关;它们不是“特征值”，不能用于设计计算。此外，还提供了某些应用的补充属性的附加信息。
EN 636胶合板—规范—检测要求
Classification system 分级
Tolerance on dimensions 尺寸偏差
General purpose （non-structural application）通用板（非结构用）
Structural application 结构用
Formaldehyde release 甲醛释放（non-structural application）
Requirements for plywood for use in dry conditions干燥环境下所用的夹板
Bonding quality 粘结质量
Biological durability 抗生物侵袭危害
Requirements for plywood for use in humid conditions 潮湿环境下所用的夹板
Bonding quality 粘结质量
Biological durability 抗生物侵袭危害
Requirements for plywood for use in exterior conditions 外部环境下所用的甲板
Bonding quality 粘结质量
Biological durability 抗生物侵袭危害
Physical properties 物理性能
Dimensional changes 尺寸改变
Moisture content 水份含量
Density 密度
Mechanical properties 机械性能
Tension properties 拉伸测试
Shear prorperties 剪切测试
Compression properties 抗压测试
Resistance to withdrawal of fasteners 紧固件拔出能力的测试
Performance properties 使用性能
Flooring 地板
Floating floors 浮动地板
Walling 墙板
Roofing 屋顶
Duration of load and creep factors 负载耐久性以及蔓延因素
Other properties 另外的特性
Classfication by surfaces appearance 表观分级
Ability for finishing 工艺能力
----------------------------------------------------------------------------------------------------------------------
- 上一篇：EN 312 刨花板-规格
- 下一篇：EN 13329强化木地板规范要求和试验方法
----------------------------------------------------------------------------------------------------------------------
