物理安全检测
EN 14566 石膏板系统用机械紧固件定义、要求和试验方法
EN 14566 石膏板系统用机械紧固件定义、要求和试验方法—标准名称
EN 14566 Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and methods
EN 14566 石膏板系统用机械紧固件-定义、要求和试验方法
EN 14566 石膏板系统用机械紧固件定义、要求和试验方法—适用范围
This European Standard specifies the characteristics and performance of mechanical fasteners, including nails, screws and staples, intended to be used for the fixing of gypsum plasterboard, gypsum boards with fibrous reinforcement, products from secondary processing and suitable ancillary products as shown in Figure 2, to timber and metal, as appropriate, in building construction works. The fasteners secure the board to the framing enabling its surface to be finished by jointing or plastering to receive decoration. They can also be used for the construction of the framing and for the connection between substructure and load bearing components and for fixing boards together. Mechanical fasteners contribute to the stability of the assembly
EN 14566 石膏板系统用机械紧固件定义、要求和试验方法--检测项目及方法：
5.5 EN ISO 12777-3 Flexural strength弯曲强度
REACH Release of dangerous substances有害物质
Protective treatment防护处理
EN ISO 9227 Protected with coating other than zinc盐雾测试
5.7 Protected with zinc coating(the thickness and/or mass of coating) 镀锌厚度和/或质量
Requirements for plasterboard nails钉子要求
5.3.3.3 Head-Dimensions and tolerances头尺寸偏差
5.3.3.1 Shank柄
5.3.3.2 Length长度
5.4(200N) Withdrawal force握钉力
Requirements for plasterboard screws螺钉要求
5.4(450N) Withdrawal force握钉力
5.6(type N,D) Point(Drilling time test)钻孔时间
5.3.3.2 Length长度
EN ISO 6508-1 Hardness硬度
Requirements for plasterboard staples空气钉要求
5.4(100N) Withdrawal force握钉力
5.3.3.2 Length长度
5.3.3.3 Crown width齿冠宽度
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
