物理安全检测
EN 12467纤维水泥平板材-产品规范和试验方法
EN 12467纤维水泥平板材-产品规范和试验方法—标准名称
EN 12467 Fibre-cement flat sheets - Product specification and test methods
EN 12467 纤维水泥平板材-产品规范和试验方法
EN 12467纤维水泥平板材-产品规范和试验方法—适用范围
This European Standard specifies the technical requirements and establishes methods of inspection and test as well as acceptance conditions for fibre-cement flat sheets, siding shingles and planks (referred to as sheets later in this document) for one or more of the following uses
本欧洲标准规定了用于以下一种或多种用途的纤维水泥平板、壁板和板材(在本文件后面提到的板材)的技术要求、检验和试验方法以及验收条件
EN 12467纤维水泥平板材-产品规范和试验方法—检测项目及方法：
7.2.3.1 Tolerance on length and width 长,宽偏差
7.2.3.2 Tolerance on thickness 厚度偏差
7.2.3.3 Straightness of edges 边直度
7.2.3.4 Squareness of sheet 边方度
7.3.1 Apparent density表观密度
7.3.7 and Annex C Moisture movement 温湿度下尺寸变化率
7.3.2 Mechanical characteristics – Bending strength (MOR) – Modulus of elasticity (MOE) 弯曲强度和弹性模量 (潮湿状态Class A&B、室温状态Class C&D)
7.3.3 Water impermeability for Categories A, B and D渗水性
7.3.4 EN ISO 12572 Condition C Water vapour permeability for Category D 水蒸气渗透性
7.4.1 Freeze-thaw for Categories A, B and D 冻融循环 (A 100 cycles, B&D 25 cycles)
7.4.2 Heat-rain for Categories A and B耐候(湿热) (A 50 cycles, B 25 cycles)
7.3.5 Warm water for Categories A, B, C and D 热水性能(60℃, 56 days)
7.3.6 Soak-dry for Categories A, B, C and D干湿循环 (A 50 cycles, B&C&D 25 cycles)
7.5 Reaction to fire防火性能
Reach Release of dangerous substances有毒有害物质
EN 12467 Marking,labelling and packaging标记
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
