物理安全检测
文章正文
ASTM C1048-12ε1半钢化玻璃和钢化玻璃标准规范
ASTM C1048-12ε1半钢化玻璃和钢化玻璃标准规范—标准名称
ASTM C1048-12ε1 Standard Specification for Heat-strengthened and Fully Tempered Flat Glass
ASTM C1048-12ε1 半钢化玻璃和钢化玻璃标准规范

ASTM C1048-12ε1半钢化玻璃和钢化玻璃标准规范—适用范围
1.1 This specification covers the requirements for mono- lithic flat heat-strengthened and fully tempered coated and uncoated glass produced on a horizontal tempering system used in general building construction and other applications.
1.2 This specification does not address bent glass, or heat- strengthened or fully tempered glass manufactured on a verti- cal tempering system.
1.3 The dimensional values stated in SI units are to be regarded as the standard. The units given in parentheses are for information only.
1.4 The following safety hazards caveat pertains only to the test method portion, Section 10, of this specification:This standard does not purport to address all ofthe safety concerns, ifany, associated with its use. It is the responsibility ofthe user of this standard to establish appropriate safety and health practices and determine the applicability ofregulatory limita- tions prior to use.
1.1本规范涵盖了普通建筑和其他应用中在水平钢化系统上生产的单片平面热强化和全钢化镀膜玻璃和非镀膜玻璃的要求。
1.2本规范不涉及弯曲玻璃,或在垂直钢化系统上制造的热强化或全钢化玻璃。
1.3以SI单位表示的尺寸值被视为标准。括号中的单位仅供参考。
1.4下列安全危险警告仅适用于本规范第10节的测试方法部分:本标准不旨在解决与其使用相关的所有安全问题(如果有)。本标准的使用者有责任在使用前建立适当的安全和健康做法,并确定法规限制的适用性。

ASTM C1048-12ε1半钢化玻璃和钢化玻璃标准规范—测试标准和要求
ASTM C 1048 place of holes孔洞位置
ASTM C 1048 Dimension & dimension tolerances of holes孔洞尺寸和偏差
ASTM C 1048 Chips and flakes缺口和白点
ASTM C 1048 Notches and cutouts凹口
Surface and edge compression requirements表面和边缘应力要求
10.8 Surface and edge compression for kind HS表面和边缘应力(HS)
10.8 Surface and edge compression for kind FT表面和边缘应力(FT)
10.9 Break test for kind FT冲击测试(FT)
C1048 Thickness厚度
C1048 Tolerance, Length and width长,宽和偏差
C1048 pattern cut切割类型
10.7 Flatness平整度
C1048 Expansion fit test for Ceramic coating陶瓷涂层玻璃应力
Method A ASTM C346  or Method B ASTM C1048  Test for pososity(Ceramic coating)孔隙率测试 
C1203 For ceramic-glass Enamel Alkali Resistance(Ceramic coating) 耐碱性
C724 For  ceramic decorations on architectural glass Acid Resistance(Ceramic coating)耐酸性
C1048 Fallout resistance耐候性
C1036 Blemish detection for point blemishes点缺陷
C1036 Blemish detection for linear blemishes线性缺陷
C1036 Ream,strings,lines, and distortion光学缺陷
Local and overall bow局部和整体弯曲 
Coating criteria, condition B,ceramic coated涂层标准,条件B,陶瓷涂层
ASTM C1376 Coating criteria, conditionC涂层标准,条件C
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
Copyright EcoSafene   备案号:闽ICP备09009213号-1