物理安全检测
EN 14179-1建筑玻璃均质钢化钠钙硅酸盐安全玻璃第1部分
EN 14179-1建筑玻璃均质钢化钠钙硅酸盐安全玻璃第1部分—标准名称
EN 14179-1 Glass in building-heat soaked thermally toughened soda lime silicate safety glass- Part 1: Definition and description
EN 14179-1 建筑玻璃-均质钢化钠钙硅酸盐安全玻璃-第1部分:定义和描述
EN 14179-1建筑玻璃均质钢化钠钙硅酸盐安全玻璃第1部分—适用范围
This European Standard specifies the heat soak process system together with tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat soaked thermally toughened soda lime silicate safety glass for use in buildings. Curved heat soaked thermally toughened soda lime silicate safety glass is not part of this European Standard. Other requirements, not specified in this European Standard, can apply to heat soaked thermally toughened soda lime silicate safety glass which is incorporated into assemblies, e.g. laminated glass or insulating units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Heat soaked thermally toughened soda lime silicate safety glass, in this case, does not lose its bending strength characteristics and its resistance to temperature differentials. Surface finished glasses (e.g. sandblasted, acid etched) after toughening are not covered by this European Standard.
本欧洲标准规定了热浸工艺系统,以及用于建筑的整体平板热浸热钢化钠钙硅酸盐安全玻璃的公差、平整度、边缘、破碎和物理和机械特性。弯曲热浸渍热钢化钠钙硅酸盐安全玻璃不是本欧洲标准的一部分。本欧洲标准中未规定的其他要求可适用于与组件(如夹层玻璃或绝缘单元)或经过附加处理(如涂层)的热浸渍热钢化钠钙硅酸盐安全玻璃。附加要求在适当的产品标准中规定。热浸热钢化钠钙硅酸盐安全玻璃,在这种情况下,不会失去其弯曲强度特性和其抗温差。增韧后的表面加工玻璃(如喷砂、酸蚀)不属于本欧洲标准的范围。
EN 14179-1建筑玻璃均质钢化钠钙硅酸盐安全玻璃第1部分—测试标准和要求
EN 14179-1 Nominal thickness and thickness tolerance公称厚度和厚度公差
EN 14179-1 Width and length宽度和长度
EN 14179-1 Flatness(Overall & Local) 平整度(整体和局部)
EN 14179-1 Diameter of holes(If applicable) 孔洞直径(适用时)
EN 14179-1 Toleraces on hole diameters(If applicable) 孔洞直径偏差(适用时)
EN 14179-1 Position of holes(If applicable) 孔洞位置(适用时)
EN 14179-1 Toleraces on hole diameters(If applicable)孔洞位置偏差(适用时)
EN 14179-1 Fragmentation test碎片测试
EN 14179-1 Optical distortion光学畸变
EN 14179-1 Anisotropy(iridesence)各向异性
EN 14179-1 Thermal durability耐热性
EN 1288-3 Mechanical strength机械强度
EN 12600 Classification:accidental human impact冲击测试和分级
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------