物理安全检测
文章正文
EN 1863 建筑玻璃热增强钠钙玻璃第1部分:定义和说明
EN 1863 建筑玻璃热增强钠钙玻璃第1部分:定义和说明—标准名称

EN 1863-1 Glass in building-Heat strengthened soda lime silicate glass-part 1: Definition and description 
EN 1863 建筑玻璃-热增强钠钙玻璃 第1部分:定义和说明

EN 1863 建筑玻璃热增强钠钙玻璃第1部分:定义和说明—适用范围

Scope:
This European Standard specifies tolerances, flatness, edgework, fragmentation and physical and mechanical characteristics of monolithic flat heat strengthened soda lime silicate glass of nominal thicknesses from 3 mm to 12 mm for use in buildings. Other requirements, not specified in this standard, can apply to heat strengthened soda lime silicate glass which is incorporated into assemblies, e.g. laminated glass or insulating glass units, or undergo an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard. Heat strengthened soda lime silicate glass, in this case, does not lose its mechanical or thermal characteristics.

本欧洲标准规定了用于建筑的标称厚度从3mm到12mm的整体平板热强化钠钙硅酸盐玻璃的公差、平整度、边缘、破碎和物理和机械特性。其他未在本标准中规定的要求可适用于混入组件的热强化钠钙硅酸盐玻璃,如夹胶玻璃或中空玻璃单元,或经过额外处理,如涂层。附加要求在适当的产品标准中规定。热强化钠钙硅酸盐玻璃,在这种情况下,不会失去其机械或热特性。

EN 1863 建筑玻璃热增强钠钙玻璃第1部分:定义和说明—测试标准和要求

EN 1863-1 Nominal thickness and thickness tolerance厚度和厚度偏差、Width and length宽度和长度、Flatness平整度、
EN 1863-1 Diameter of holes孔洞直径、Toleraces on hole diameters孔洞直径偏差、Position of holes孔洞位置、Toleraces on hole diameters孔洞位置偏差
EN 1863-1 Fragmentation test碎片测试
EN 1863-1 Oprical distortion光畸变、Anisotropy各向异性、Thermal durability耐热性
EN 1288-3 Mechanical strength机械强度
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
Copyright EcoSafene   备案号:闽ICP备09009213号-1