物理安全检测
ASTM C612矿棉绝热板状及块状标准规范
ASTM C612 矿棉绝热板状及块状标准规范—标准名称
ASTM C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
ASTM C612矿棉绝热板状及块状标准规范
ASTM C612 矿棉绝热板状及块状标准规范—适用范围
Scope:
This specification covers the classification, composition, dimension, and physical properties of mineral fiber (rock, slag, or glass) semi-rigid and rigid board intended for the use as thermal insulation on surfaces operating at temperatures between 0°F (-18°C) and 1800°F (982°C). For specific applications, the actual temperature limits shall be agreed upon between the supplier and the purchaser. For satisfactory performance, properly installed protective vapor retarder or barriers shall be used on below ambient temperature applications to reduce movement of water through or around the insulation towards the colder surface. Failure to use a vapor retarder or barrier can lead to insulation and system damage. Refer to Practice C921 to aid material selection. Although vapor retarder properties are not part of this specification, properties required in Specification C1136 are pertinent to applications or performance.
ASTM C612 矿棉绝热板状及块状标准规范—测试项目和方法
ASTM C411 C447 Maximum use temperature最高使用温度 Hot surface performance 热面性能试验 (Specified temperature) (指定温度)
ASTM C177 C518 or C1114 Apparent thermal conductivity表观导热系数
ASTM C165 Compressive strength抗压强度
ASTM C356 Soaking heat linear shrinkage(Specified temperature) 线性收缩(指定温度)
ASTM C1104/C1104M Water wapor sorption水蒸气吸收
ASTM E84 Surface burning表面燃烧
ASTM C1304 Odor emissiom气味
ASTM C665 Corrosiveness to Steel 对钢铁腐蚀
ASTM C795, C692 Stress Corrosion Performance for Use on Austenitic Stainless Steel 对奥氏体不锈钢应力腐蚀
ASTM C1101 Semi-rigidity or Rigidity硬度
ASTM C1335 Shot content渣球含量
ASTM C1338 Fungi resistance抗菌
ASTM C303 Dimensions, Mass and Permissible Variations尺寸质量及公差
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------