物理安全检测
文章正文
EN 14306绝热产品工厂制硅酸钙产品规范
EN 14306 建筑设备和工业设施用绝热产品工厂制硅酸钙产品规范—标准名称
EN 14306 Thermal insulation products for building equipment and industrial installations-Factory made calcium silicate(CS) products-Specification 
EN 14306 建筑设备和工业设施用绝热产品-工厂制硅酸钙(CS)产品-规范

EN 14306 建筑设备和工业设施用绝热产品工厂制硅酸钙产品规范—标准名称
Scope:
This European Standard specifies the requirements for factory made calcium silicate products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately – 170℃to + 1 100℃ Calcium silicate products can be used below - 50℃ Below the operating temperature of - 50℃ special tests@ regarding the suitability of the product in the intended application are advised (e.g. liquefaction of oxygen). Manufacturer's advice should be heeded in all cases. The products are manufactured in the form of boards@ pipe sections@ segments and prefabricated ware. This European Standard describes product characteristics and includes procedures for testing@ evaluation of conformity@ marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. This European Standard does not specify the required level or class of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,6 W/(m K) at 10℃are not covered by this standard. This European Standard does not cover products intended to be used for the insulation of the building structure. This European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.

EN 14306 建筑设备和工业设施用绝热产品工厂制硅酸钙产品规范—测试项目和方法

For all applications (For sheets, rolls and tapes) 通用要求
EN 12667(thin) EN 12939(thick) Thermal conductivity导热系数
EN 822 EN 823 Linear dimensions (Length, width, Thickness) 线性尺寸(长宽厚)
EN 824 Squareness直角度
EN 825 Flatness平整度
EN 1604 Dimensional stability 尺寸稳定性(23℃,90%,48h)
EN 13501-1 Reaction to fire of the product as placed on the market与火反应

For specific applications  (For sheets, rolls and tapes) 特定要求
EN 1094-6 Maximum service temperature最高使用温度
Annex B Minimum service temperature最低使用温度
EN 826 Compressive stress or strength 压缩强度
EN 13468 Trace quantities of water soluble ions and the pH-value可溶氯含量和pH值
EN 12086 Water vapour diffusion resistance水蒸气扩散阻力
EN 1609 Short term water absorption短时吸水率
Release of dangerous substances 有害物质
Continuous glowing combustion持续燃烧
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
Copyright EcoSafene   备案号:闽ICP备09009213号-1