物理安全检测
文章正文
BS EN ISO 868 塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度)
BS EN ISO 868 塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度)-标准名称

BS EN ISO 868 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS EN ISO 868 塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度)

BS EN ISO 868 塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度)—适用范围

This International Standard specifies a method for the determination of the indentation hardness of plastics and ebonite by means of durometers of two types: type A is used for softer materials and type D for harder materials (see the Note to 8.2). The method permits measurement either of the initial indentation or of the indentation after a specified period of time, or both. NOTE The durometers and the methods specified in this International Standard are referred to as type A Shore and type D Shore durometers and durometer methods, respectively. 1.2 This method is an empirical method intended primarily for control purposes. No simple relationship exists between indentation hardness determined by this method and any fundamental property of the material tested. For specification purposes, it is recommended that ISO 48, Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD), be used for the softer materials.

BS EN ISO 868 塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度)—相关标准

KS M ISO 868 塑料和硬质胶.用硬度计测定针入硬度[肖氏(SHORE)硬度]
JUS G.S2.525 塑料.压痕硬度的硬度计法测定(肖氏硬度)
DIN EN ISO 868 塑料和硬质胶.用硬度计测定针入硬度[肖氏(SHORE)硬度]
DIN 53505  生橡胶.弹性体和塑料的检验.肖氏(Shore)A和D 硬度试验
BS EN ISO 868  塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度)
BS 7442 Sec.3.2 橡胶或塑料被覆辊子.肖氏硬度的试验测定方法
EN ISO 868  塑料和硬质橡胶.用硬度计测定压痕硬度[肖氏(SHORE)硬度] ISO 868-2003
ISO 868 塑料和硬质胶.用硬度计测定针入硬度[肖氏(SHORE)硬度]
ISO 868 塑料和硬质橡胶 用硬度计测定压痕硬度[肖氏(SHORE)硬度]
NF T51-174 塑料和硬质橡胶.用硬度计测定压痕硬度[肖氏(SHORE)硬度]
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
Copyright EcoSafene   备案号:闽ICP备09009213号-1