物理安全检测
文章正文
ISO 34-1硫化或热塑性塑料橡胶.撕裂强度测定.第1部分
ISO 34-1硫化或热塑性塑料橡胶.撕裂强度测定.第1部分—标准名称

ISO 34-1 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 34-1硫化或热塑性塑料橡胶.撕裂强度测定.第1部分:裤型,直角型和新月型试样

ISO 34-1硫化或热塑性塑料橡胶.撕裂强度测定.第1部分—适用范围

Scope:
This part of ISO 34 specifies three test methods for the determination of the tear strength of vulcanized or thermoplastic rubber, namely the following: method A, using a trouser test piece; method B, using an angle test piece, with or without a nick of specified depth; method C, using a crescent test piece with a nick.

ISO 34-1硫化或热塑性塑料橡胶.撕裂强度测定.第1部分—引用文件

ISO 5893, Rubber and plastics test equipment — Tensile, flexural and compression types (constant rate of traverse) — Specification

ISO 6133, Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

ISO 18899:2013, Rubber — Guide to the calibration of test equipment

ISO 23529, Rubber — General procedures for preparing and conditioning test pieces for physical test methods
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
Copyright EcoSafene   备案号:闽ICP备09009213号-1