物理安全检测
文章正文
ISO 4633橡胶密封.供水、排水和污水管道用密封圈.材料规范
ISO 4633橡胶密封.供水、排水和污水管道用密封圈.材料规范—标准名称

Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials
ISO 4633橡胶密封.供水、排水和污水管道用密封圈.材料规范

ISO 4633橡胶密封.供水、排水和污水管道用密封圈.材料规范—适用范围

Scope:
This International Standard specifies requirements for materials used in vulcanized rubber seals for the following: a) cold drinking-water supplies (up to 50 °C); b) drainage, sewerage, and rainwater systems (continuous flow up to 45 °C and intermittent flow up to 95 °C).

ISO 4633橡胶密封.供水、排水和污水管道用密封圈.材料规范—引用文件

ISO 37 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties

ISO 48 Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)

ISO 188 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests

ISO 815-1 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated temperatures

ISO 815-2 Rubber, vulcanized or thermoplastic — Determination of compression set — Part 2: At low temperatures

ISO 1431-1 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing

ISO 1817 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids

ISO 2285 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

ISO 3302-1 Rubber — Tolerances for products — Part 1: Dimensional tolerances

ISO 3384-1 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression — Part 1: Testing at constant temperature

ISO 3387 Rubber — Determination of crystallization effects by hardness measurements

ISO 6914 Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation in tension

ISO 9691 Rubber — Recommendations for the workmanship of pipe joint rings — Description and classification of imperfections

ISO 23529 Rubber — General procedures for preparing and conditioning test pieces for physical test methods
 
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
Copyright EcoSafene   备案号:闽ICP备09009213号-1