物理安全检测
文章正文
ASTM D1149橡胶劣化和X2014的标准试验方法;臭氧控制环境中的开裂
ASTM D1149橡胶劣化和X2014的标准试验方法;臭氧控制环境中的开裂—标准名称

ASTM D1149 Standard Test Methods for Rubber Deterioration&x2014; Cracking in an Ozone Controlled Environment
ASTM D1149橡胶劣化和X2014的标准试验方法;臭氧控制环境中的开裂

ASTM D1149橡胶劣化和X2014的标准试验方法;臭氧控制环境中的开裂—适用范围

Scope:
These test methods are used to estimate the effect of exposure, under surface tensile strain conditions, either dynamic or static, in an atmosphere containing specified levels of ozone concentration, expressed as partial pressure (refer to Note 1), on vulcanized rubber, rubber compounds, molded or extruded soft rubber, and other specified materials, or as may be determined empirically. The effect of naturally occurring sunlight or light from artificial sources is excluded

ASTM D1149橡胶劣化和X2014的标准试验方法;臭氧控制环境中的开裂—引用文件

ASTM D518 Test Method for Rubber Deterioration—Surface Cracking 

ASTM D1171 Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)

ASTM D1349 Practice for Rubber—Standard Conditions for Testing

ASTM D3182 Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

ASTM D3395 Test Methods for Rubber Deterioration—Dynamic Ozone Cracking in a Chambe
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
Copyright EcoSafene   备案号:闽ICP备09009213号-1