CE Marking
CE Marking for Machinery-Standard
CE Marking for Machinery
& Ecosafene have rich experience to provide Certification for Machinery
CE marking to Machinery- Standard List：
ü EN 81-40:2008 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
ü EN 81-43:2009 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
ü EN 115-1:2008 Safety of escalators and moving walks - Part 1: Construction and installation
ü EN 289:2004+A1:2008 Plastics and rubber machines - Presses - Safety requirements
ü EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
ü EN 378-2:2008+A1:2009 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
ü EN 415-1:2000+A1:2009 Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment
ü EN 415-7:2006+A1:2008 Safety of packaging machines - Part 7: Group and secondary packaging machines
ü EN 415-8:2008 Safety of packaging machines - Part 8: Strapping machines
ü EN 422:2009 Plastics and rubber machines - Blow moulding machines - Safety requirements
ü EN 474-1:2006+A1:2009 Earth-moving machinery - Safety - Part 1: General requirements
ü EN 474-2:2006+A1:2008 Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers
ü EN 474-3:2006+A1:2009 Earth-moving machinery - Safety - Part 3: Requirements for loaders
ü EN 474-6:2006+A1:2009 Earth-moving machinery - Safety - Part 6: Requirements for dumpers
ü EN 474-7:2006+A1:2009 Earth-moving machinery - Safety - Part 7: Requirements for scrapers
ü EN 474-8:2006+A1:2009 Earth-moving machinery - Safety - Part 8: Requirements for graders
ü EN 474-9:2006+A1:2009 Earth-moving machinery - Safety - Part 9: Requirements for pipelayers
ü EN 474-10:2006+A1:2009 Earth-moving machinery - Safety - Part 10: Requirements for trenchers
ü EN 474-11:2006+A1:2008 Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors
ü EN 474-12:2006+A1:2008 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators
ü EN 500-2:2006+A1:2008 Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
ü EN 500-3:2006+A1:2008 Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines
ü EN 500-6:2006+A1:2008 Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers
ü EN 528:2008 Rail dependent storage and retrieval equipment - Safety requirements
ü EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
ü EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
ü EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data
ü EN 574:1996+A1:2008 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
ü EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
ü EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
ü EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
ü EN 626-2:1996+A1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
ü EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels
ü EN 676:2003+A2:2008/AC:2008
ü EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety
ü EN 693:2001+A1:2009 Machine tools - Safety - Hydraulic presses
ü EN 709:1997+A2:2009 Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety
ü EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
ü EN 791:1995+A1:2009 Drill rigs - Safety
ü EN 792-1:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
ü EN 792-2:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools
ü EN 792-3:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers
ü EN 792-4:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools
ü EN 792-5:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
ü EN 792-6:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
ü EN 792-7:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
ü EN 792-8:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers
ü EN 792-9:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
ü EN 792-10:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools
ü EN 792-11:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
ü EN 792-12:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws
ü EN 792-13:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools
ü EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
ü EN 818-1:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance
ü EN 818-2:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8
ü EN 818-3:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4
ü EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
ü EN 818-5:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4
ü EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer
ü EN 818-7:2002+A1:2008 Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
ü EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
ü EN 869:2006+A1:2009 Safety of machinery - Safety requirements for pressure metal diecasting units
ü EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
ü EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ü EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
ü EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
ü EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
ü EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ü EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
ü EN 996:1995+A3:2009 Piling equipment - Safety requirements
ü EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
ü EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
ü EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
ü EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
ü EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
ü EN 1028-1:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements
ü EN 1028-2:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements
ü EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
ü EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
ü EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
ü EN 1093-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
ü EN 1093-2:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
ü EN 1093-3:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
ü EN 1093-4:1996+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
ü EN 1093-6:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
ü EN 1093-7:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
ü EN 1093-8:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method
ü EN 1093-9:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
ü EN 1093-11:2001+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
ü EN 1114-2:1998+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
ü EN 1114-3:2001+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
ü EN 1127-2:2002+A1:2008 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
ü EN 1218-2:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains
ü EN 1218-3:2001+A1:2009 Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers
ü EN 1218-4:2004+A2:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s)
ü EN 1248:2001+A1:2009 Foundry machinery - Safety requirements for abrasive blasting equipment
ü EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment
ü EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
ü EN 1398:2009 Dock levellers - Safety requirements
ü EN 1417:1996+A1:2008 Plastics and rubber machines - Two roll mills - Safety requirements
ü EN 1417:1996+A1:2008/AC:2009
ü EN 1492-1:2000+A1:2008 Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
ü EN 1492-2:2000+A1:2008 Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use
ü EN 1492-4:2004+A1:2008 Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes
ü EN 1493:1998+A1:2008 Vehicle lifts
ü EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment
ü EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
ü EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles
ü EN 1526:1997+A1:2008 Safety of industrial trucks - Additional requirements for automated functions on trucks
ü EN 1547:2001+A1:2009 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
ü EN 1550:1997+A1:2008 Machine-tools safety - Safety requirements for the design and construction of work holding chucks
ü EN 1612-1:1997+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units
ü EN 1672-2:2005+A1:2009 Food processing machinery - Basic concepts - Part 2: Hygiene requirements
ü EN 1677-1:2000+A1:2008 Components for slings - Safety - Part 1: Forged steel components, Grade 8
ü EN 1677-2:2000+A1:2008 Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8
ü EN 1677-3:2001+A1:2008 Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8
ü EN 1677-4:2000+A1:2008 Components for slings - Safety - Part 4: Links, Grade 8
ü EN 1677-5:2001+A1:2008 Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4
ü EN 1677-6:2001+A1:2008 Components for slings - Safety - Part 6: Links - Grade 4
ü EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines
ü EN 1755:2000+A1:2009 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust
ü EN 1756-1:2001+A1:2008 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
ü EN 1760-1:1997+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
ü EN 1760-2:2001+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
ü EN 1760-3:2004+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices
ü EN 1777:2004+A1:2009 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
ü EN 1829-2:2008 High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors
ü EN 1845:2007 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
ü EN 1846-2:2001+A3:2009 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance
ü EN 1846-3:2002+A1:2008 Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance
ü EN 1870-1:2007+A1:2009
Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws
ü EN 1870-3:2001+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches
ü EN 1889-2:2003+A1:2009 Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
ü EN 1915-1:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
ü EN 1915-2:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods
ü EN 1915-3:2004+A1:2009 Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction
ü EN 1915-4:2004+A1:2009 Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction
ü EN ISO 2151:2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)
ü EN ISO 2860:2008 Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)
ü EN ISO 2867:2008 Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)
ü EN ISO 3164:2008 Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995)
ü EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
ü EN ISO 3449:2008 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)
ü EN ISO 3450:2008 Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996)
ü EN ISO 3457:2008 Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)
ü EN ISO 3471:2008 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)
ü EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)
ü EN ISO 6682:2008 Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
ü EN ISO 6683:2008 Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)
ü EN ISO 7096:2008 Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)
ü EN ISO 7096:2008/AC:2009
ü EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
ü EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)
ü EN ISO 8230-2:2008
ü Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)
ü EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)
ü EN ISO 10218-1:2008 Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006, including Cor 1:2007)
ü EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
ü EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)
ü EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)
ü EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)
ü EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)
ü EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)
ü EN ISO 11102-2:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)
ü EN ISO 11145:2008 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006)
ü EN ISO 11252:2008
Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004)
Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004)
ü EN ISO 11553-1:2008 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
ü EN ISO 11553-2:2008
Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)
Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)
ü EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006)
ü EN ISO 11680-1:2008 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000)
ü EN ISO 11680-2:2008 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000)
ü EN ISO 11681-1:2008 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007)
ü EN ISO 11681-2:2008 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2006)
ü EN ISO 11806:2008 Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)
ü EN 12012-1:2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators
ü EN 12012-2:2001+A2:2008 Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
ü EN 12012-3:2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
ü EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
ü EN 12013:2000+A1:2008 Plastics and rubber machines - Internal mixers - Safety requirements
ü EN 12016:2004+A1:2008 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
ü EN 12053:2001+A1:2008 Safety of industrial trucks - Test methods for measuring noise emissions
ü EN 12077-2:1998+A1:2008 Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices
ü EN 12110:2002+A1:2008 Tunnelling machines - Air locks - Safety requirements
ü EN 12162:2001+A1:2009 Liquid pumps - Safety requirements - Procedure for hydrostatic testing
ü EN 12198-1:2000+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
ü EN 12198-2:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure
ü EN 12198-3:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
ü EN 12254:1998+A2:2008 Screens for laser working places - Safety requirements and testing
ü EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety requirements
ü EN 12312-1:2001+A1:2009 Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs
ü EN 12312-2:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles
ü EN 12312-3:2003+A1:2009 Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles
ü EN 12312-4:2003+A1:2009 Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges
ü EN 12312-5:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment
ü EN 12312-6:2004+A1:2009 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment
ü EN 12312-7:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment
ü EN 12312-8:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms
ü EN 12312-9:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders
ü EN 12312-10:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters
ü EN 12312-12:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment
ü EN 12312-13:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment
ü EN 12312-14:2006+A1:2009 Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles
ü EN 12312-15:2006+A1:2009 Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors
ü EN 12312-16:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment
ü EN 12312-17:2004+A1:2009 Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment
ü EN 12312-18:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units
ü EN 12312-19:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions
ü EN 12312-20:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
ü EN 12321:2003+A1:2009 Underground mining machinery - Specification for the safety requirements of armoured face conveyors
ü EN 12336:2005+A1:2008 Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
ü EN 12348:2000+A1:2009 Core drilling machines on stand - Safety
ü EN 12385-1:2002+A1:2008 Steel wire ropes - Safety - Part 1: General requirements
ü EN 12385-2:2002+A1:2008 Steel wire ropes - Safety - Part 2: Definitions, designation and classification
ü EN 12385-3:2004+A1:2008 Steel wire ropes - Safety - Part 3: Information for use and maintenance
ü EN 12385-4:2002+A1:2008 Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
ü EN 12385-10:2003+A1:2008 Steel wire ropes - Safety - Part 10: Siral ropes for general structural applications
ü EN 12409:2008 Plastics and rubber machines - Thermoforming machines - Safety requirements
ü EN 12417:2001+A2:2009
Machine tools - Safety - Machining centres
Machine tools - Safety - Machining centres
ü EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site - Safety
ü EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
ü EN 12547:1999+A1:2009 Centrifuges - Common safety requirements
ü EN 12549:1999+A1:2008 Acoustics - Noise test code for fastener driving tools - Engineering method
ü EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates - Installation and use
ü EN 12643:1997+A1:2008 Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified)
ü EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions
ü EN 12644-2:2000+A1:2008 Cranes - Information for use and testing - Part 2: Marking
ü EN 12649:2008 Concrete compactors and smoothing machines - Safety
ü EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
ü EN 12717:2001+A1:2009 Safety of machine tools - Drilling machines
ü EN 12733:2001+A1:2009 Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
ü EN 12881-1:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
ü EN 12881-2:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
ü EN 12882:2008 Conveyor belts for general purpose use - Electrical and flammability safety requirements
ü EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
ü EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
ü EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents
ü EN 12957:2001+A1:2009 Machine tools - Safety - Electro discharge machines
ü EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
ü EN 13001-1:2004+A1:2009 Cranes - General design - Part 1: General principles and requirements
ü EN 13001-2:2004+A3:2009 Crane safety - General design - Part 2: Load effects
ü EN 13015:2001+A1:2008 Maintenance for lifts and escalators - Rules for maintenance instructions
ü EN 13019:2001+A1:2008 Machines for road surface cleaning - Safety requirements
ü EN 13021:2003+A1:2008 Winter service machines - Safety requirements
ü EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
ü EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
ü EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
ü EN 13102:2005+A1:2008 Ceramic machines - Safety - Loading and unloading of fine clay tiles
ü EN 13120:2009 Internal blinds - Performance requirements including safety
ü EN 13128:2001+A2:2009 Safety of machine tools - Milling machines (including boring machines)
ü EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments
ü EN 13218:2002+A1:2008 Machine tools - Safety - Stationary grinding machines
ü EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements
ü EN 13367:2005+A1:2008 Ceramic machines - Safety - Transfer platforms and cars
ü EN 13411-1:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings
ü EN 13411-2:2001+A1:2008 Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings
ü EN 13411-3:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing
ü EN 13411-4:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
ü EN 13411-5:2003+A1:2008 Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
ü EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
ü EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
ü EN 13414-1:2003+A2:2008 Steel wire rope slings - Safety - Part 1: Slings for general lifting service
ü EN 13414-2:2003+A2:2008 Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer
ü EN 13414-3:2003+A1:2008 Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings
ü EN 13418:2004+A1:2008 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
ü EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection
ü EN 13490:2001+A1:2008 Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration
ü EN 13524:2003+A1:2009 Highway maintenance machines - Safety requirements
ü EN 13531:2001+A1:2008 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)
ü EN 13557:2003+A2:2008 Cranes - Controls and control stations
ü EN 13561:2004+A1:2008 External blinds - Performance requirements including safety
ü EN 13586:2004+A1:2008 Cranes - Access
ü EN 13617-1:2004+A1:2009 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
ü EN 13659:2004+A1:2008 Shutters - Performance requirements including safety
ü EN 13683:2003+A1:2009 Garden equipment - Integrally powered shredders/chippers - Safety
ü EN 13731:2007 Lifting bag systems for fire and rescue service use - Safety and performance requirements
ü EN 13732:2002+A2:2009 Food processing machinery - Bulk Milk Coolers on Farms - Requirements for construction, performance, suitability for use, safety and hygiene
ü EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
ü EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)
ü EN 13736:2003+A1:2009 Safety of machine tools - Pneumatic presses
ü EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)
ü EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006)
ü EN ISO 13849-1:2008/AC:2009 EN ISO 13849-2:2008 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003)
ü EN ISO 13850:2008 Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006)
ü EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
ü EN 13862:2001+A1:2009 Floor cutting-off machines - Safety
ü EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety
ü EN 13898:2003+A1:2009 Machine tools - Safety - Sawing machines for cold metal
ü EN 13951:2003+A1:2008 Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use
ü EN 13985:2003+A1:2009 Machine tools - Safety - Guillotine shears
ü EN 14017:2005+A1:2008 Agricultural and forestry machinery - Solid fertilizer distributors - Safety
ü EN 14043:2005+A1:2009 High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods
ü EN 14044:2005+A1:2009 High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods
ü EN 14070:2003+A1:2009 Safety of machine tools - Transfer and special-purpose machines
ü EN ISO 14121-1:2007 Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
ü EN ISO 14159:2008 Safety of machinery - Hygiene requirements for the design of machinery
ü EN 14439:2006+A2:2009 Cranes - Safety - Tower cranes
ü EN 14462:2005+A1:2009 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
ü EN 14466:2005+A1:2008 Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests
ü EN 14502-2:2005+A1:2008 Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations
ü EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
ü EN 14710-1:2005+A2:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements
ü EN 14710-2:2005+A2:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements
ü EN ISO 14738:2008 Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)
ü EN 14753:2007 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
ü EN 14886:2008 Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
ü EN 14910:2007+A1:2009 Garden equipment - Walk-behind combustion engine powered trimmers - Safety
ü EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces
EN 14958:2006+A1:2009 Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements
EN 14958:2006+A1:2009 Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements
ü EN 14973:2006+A1:2008 Conveyor belts for use in underground installations - Electrical and flammability safety requirements
ü EN ISO 14982:2009 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
ü EN 15000:2008 Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters
ü EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site - Safety
ü EN 15056:2006+A1:2009 Cranes - Requirements for container handling spreaders
ü EN 15059:2009 Snow grooming equipment - Safety requirements
ü EN 15061:2007+A1:2008 Safety of machinery - Safety requirements for strip processing line machinery and equipment
ü EN 15067:2007 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
ü EN 15093:2008
Safety of Machinery - Safety requirements for hot flat rolling mills
Safety of Machinery - Safety requirements for hot flat rolling mills
ü EN 15094:2008 Safety of Machinery - Safety requirements for cold flat rolling mills
ü EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
ü EN 15162:2008 Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws
ü EN 15163:2008 Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws
ü EN 15164:2008 Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines
ü EN 15166:2008 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
ü EN 15268:2008 Petrol filling stations - Safety requirements for the construction of submersible pump assemblies
ü EN ISO 15536-1:2008 Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)
ü EN ISO 15744:2008 Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)
ü EN ISO 19432:2008 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006)
ü EN ISO 20361:2009 Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007)
ü EN ISO 20643:2008 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005)
ü EN ISO 22867:2008 Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004, including Cor 1:2006)
ü EN ISO 22868:2008 Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005)
ü EN 30326-1:1994 Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992)
ü EN 30326-1:1994/A1:2007
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------