物理安全检测
EN 13163 建筑绝热产品-工厂生产发泡聚乙烯产品-规范
EN 13163 建筑绝热产品-工厂生产发泡聚乙烯产品-规范—标准名称
EN 13163 Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification
EN 13163 建筑绝热产品-工厂生产发泡聚乙烯产品-规范
EN 13163 建筑绝热产品-工厂生产发泡聚乙烯产品-规范—适用范围
Scope:
This European Standard specifies the requirements for factory made expanded polystyrene products, with or without rigid or flexible facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards or rolls or other preformed ware (flat, tapered, tongue and grooves, shiplap, profiled etc.). Products covered by this standard are also used for sound insulation and in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.
EN 13163 建筑绝热产品-工厂生产发泡聚乙烯产品-规范—测试项目和方法
For all applications 通用要求
EN 12667(thin) EN 12939(thick) Thermal resistance and thermal conductivity(10±0.3℃) 热阻和导热系数(10±0.3℃)
EN 822 Length and width长度和宽度
EN 823 Thickness厚度
EN 824 Squareness垂直度
EN 825 Flatness 平整度
EN 13501-1 EN 15715 Recation to fire与火反应
For specific applications 特定要求
EN 1603 method B1 Dimensional stability尺寸稳定性
EN 1604 Dimensional stability尺寸稳定性
EN 824 Squareness垂直度
EN 826 Compressive stress at 10% deformation 10%变形时压缩应力
EN 12089 Method B Bending strength 弯曲强度
EN 1607 Tensile strength perpendicular to faces垂直于表面的拉伸强度
EN 1605 Deformation under specific compressive load and temperature conditions特定的温度条件和压缩载荷下的变形
EN 1606 Compressive creep 压缩蠕变
EN 12090 Shear strength剪切强度
EN 13793 Cyclic loading behavior循环载荷测试
EN 12087, method 2A Long-term water absorption by immersion长时吸水率(浸没法)
EN 12088 Long-term water absorption by diffusion长时吸水率(扩散法)
EN 12091 Freeze-thaw resistance冻融循环
EN 12086 Water vapour transmission 水蒸气传输率
EN 29052-1 Dynamic stiffness动态刚度
Compressibility (only applicable on EPS Tproducts)压缩性
EN 12431 Thickness,dL厚度
EN 12431 Thickness,dB厚度
EN 1606(曝露时间10/25/50年,测试时间至少122/304/608d) Long-term thickness reduction长期厚度下降
EN 1602 Apparent density表观密度
EN 13501-1 EN 15715 Recation to fire in standardized assemblies simulating end-use applications
模拟使用环境下的与火反应
Continuous glowing combustion 持续燃烧
Release of dangerous substances有害物质
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------