物理安全检测
EN 13164 建筑绝热产品-工厂生产挤塑聚苯乙烯泡沫板-规范
EN 13164 建筑绝热产品-工厂生产挤塑聚苯乙烯泡沫板-规范—标准名称
EN 13164 Thermal insulation products for buildings-Factory made products of extruded polystyrene foam(XPS)- Specification
EN 13164 建筑绝热产品-工厂生产挤塑聚苯乙烯泡沫板-规范
EN 13164 建筑绝热产品-工厂生产挤塑聚苯乙烯泡沫板-规范—适用范围
Scope:
This European Standard specifies the requirements for factory made products of extruded polystyrene foam, with or without facings or coatings, which are used for thermal insulation of buildings. The products are manufactured in the form of boards which are also available with special edge and surface treatment (tongue & grooves, shiplap etc.). Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
EN 13164 建筑绝热产品-工厂生产挤塑聚苯乙烯泡沫板-规范—测试项目和方法
For all applications 通用要求
EN 12667(thin) EN 12939(thick) Thermal resistance and thermal conductivity(10±0.3℃) 热阻和导热系数(10±0.3℃)
EN 822 Length and width长和宽
EN 824 Squareness直角度
EN 825 Flatness平整度
EN 823 Thickness厚度
EN 13501-1 EN 15715 Recation to fire与火反应
For specific applications 特定要求
EN 1604 Dimensional stability尺寸稳定性
EN 1605 Deformation under specified compressive load and temperature conditions特定载荷和温度下的变形
EN 826 Compressive stress or compressive strength压缩应力或压缩强度
EN 1607 Tensile strength perpendicular to faces垂直表面抗拉强度
EN 1606 Compressive creep压缩蠕变
EN 12087 Method 2A Long term water absorption by immersion浸没长时吸水率
EN 12088 Long term water absorption by diffusion弥散长时吸水率
EN 12091 Freeze-thaw resistance冻融循环
EN 12086 Water vapour transmission水蒸气传输率
Release of dangerous substances有害物质
EN 13501-1 EN 15715 Recation to fire in standardized assemblies simulating end-use applications模拟使用环境下的与火反应
Continuous glowing combustion持续燃烧
EN 12090 Shear strength剪切强度
Appendix C Ageing procedure for test specimens for the determination of thermal properties老化后热性能
EN 13793 Behaviour under cyclic loading循环载荷
EN 826 Compressive modulus of elasticity压缩模量
EN 12089 Bending strength弯曲强度
ISO 4590 Volume percentage of open and closed cells开孔和闭孔体积率
----------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------