BS 7175 Fire test to bedcovers and pillows

Article
 
 
BS 7175 Fire test to bedcovers and pillows
 
BS 7175: Fire test for bedcovers and pillows - Standard Title
 
BS 7175:1989Methods of test for the ignitability of bedcovers and pillows by smouldering and flaming ignition sources
 
BS 7175: Fire test for bedcovers and pillows - Standard Brief
 
BS 7175 describes methods of test for the ignitability of bedcovers and pillows when subjected to smouldering and flaming types of ignition sources of differing severities.
 
BS 7175: Fire test for bedcovers and pillows - Products Scope
 
This British Standard describes methods of test for the ignitability of following products:
 
- Bedcovers
- Pillows
 
BS 7175: Fire test for bedcovers and pillows - Test Method
 
The materials to be tested and the ignition sources shall be conditioned immediately before the test for 72 h in indoor ambient conditions and then for at least 16 h in an atmosphere having a temperature of 20 ± 5 °C and a relative humidity of 65 ± 5 %.
 
BS 7175, for the testing, a draught-free environment having a temperature of 15 °C to 30 °C and a relative humidity of 55 ± 20° shall be used. If the test is not carried out immediately after conditioning, place the conditioned specimens in a sealed container until the start of the test. Begin testing each specimen within 10 min of removing it from either the conditioning atmosphere or the sealed container.
 
BS 7175: Fire test for bedcovers and pillows - Material under products scope:
 
- Continental quilts
- Pillows
- Continental quilts
- Individual bedcovers
- Mattress cases
- Mattress covers,
- Sheets,
- Pillowslips,
- Blankets,
- Bedspreads
- Continental quilt covers
 
BS 7175: Fire test for bedcovers and pillows - Reference Standard:
 
- BS 5803, Thermal insulation for pitched roof spaces in dwellings.
- BS 5803-1, Specification for man-made mineral fibre thermal insulation mats.
- BS 5852, Fire tests for furniture.
-  BS 5852-1, Methods of test for the ignitability by smokers’ materials of upholstered composites for seating.
- BS 5852-2, Methods of test for the ignitability of upholstered composites for seating by flaming sources.
- BS 6807: Methods of test for the ignitability of mattresses with primary and secondary sources of ignition1).
----------------------------------------------------------------------------------------------------------------------
[ Add to Favorites ]  [ Print this page ]  [ Close the window ]  [ Back to top ]
Copyright EcoSafene  闽ICP备09009213号-1