CAN/ULC-S102-2: Fire test for surface building characteristics of flooring, floor coverings
CAN/ULC-S102-2: Fire test for surface building characteristics of flooring, floor coverings
CAN/ULC-S102-2 Fire tests on building materials– Standard:
CAN-ULC-S102-2:Standard method of test for surface building characteristics of flooring, floor coverings, and miscellaneous materials and assemblies.
CAN/ULC-S102-2 Fire tests on building materials–Standard Scope:
This Standard is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm. This method is also applicable to the following:
A Materials which cannot be tested as described in Clause 1.1 of CAN/ULC-S102 without the use of supporting material that is not representative of the intended installation;
B Materials which, when tested in the manner described in Clause 1.1 of CAN/ULC-S102, melts or drips, or otherwise disintegrates and continues to burn on the floor of the test chamber;
C Materials designed for use in a relatively horizontal position with only its top surface exposed to air; or D Thermoplastic materials.
CAN/ULC-S102-2Fire tests on building materials and structures–Relative Standard:
- ISO 1182: Reaction to fire tests for products -- Non-combustibility test
- GB/T 5464：Non-combustibility test method of building materials
- BS 476: Fire tests on building materials and structures
- BS 476-7：Fire Tests on Building Materials and Structures Part 7: Method of Test to Determine the Classification of the Surface Spread of Flame of Products
- EN 13501-1: Fire classification of construction products and building elements- Part1:
Classification using data from reaction to fire tests
- AS 1530：Methods for fire tests on building materials，components and structures
----------------------------------------------------------------------------------------------------------------------