ASTM E814 Standard Test Method for Fire Tests of Penetration Firestop Systems.

 

     This test method is applicable to firestop systems of various materials and construction. Firestop systems are intended for use in openings in fire-resistive walls and floors that are evaluated in accordance with Test Methods E119.

 

     Tests conducted in conformance with this test method record firestop system performance during the test exposure; but such test shall not be construed to determine suitability of the firestop systems for use after test exposure.

 

     This test method also measures the resistance of firestop systems to an external force stimulated by a hose stream. However, this test method shall not be construed as determining the performance of the firestop system during actual fire conditions when subjected to forces such as failure of cable support systems and falling debris.

 

Ambient at 0 min

538℃ at 5min

704℃ at 10min

843℃ at 30min

927℃ at 60min

1010℃ at 120min

1093℃ at 240min

1260℃ at 480min or over

 

ASTM E814 Fire Test to Building Material – Relative Standard 

BS 476-20：Fire Tests on Building Materials and Structures Part 20: Method for Determination 

of the Fire Resistance of Elements of Construction (General Principles)

BS 476-21：Fire Tests on Building Materials and Structures Part 21: Methods for Determination 

of the Fire Resistance of Load bearing Elements of Construction

BS 476-22：Fire Tests on Building Materials and Structures Part 22: Methods for etermination 

of the Fire Resistance of Non- Load bearing Elements of onstruction

BS 476-23：Fire Tests on Building Materials and Structures Part 23: Methods for Determination 

ASTM E 119 Standard test method for Fire tests of building construction and materials

GB/T 9978：Fire-resistance tests - Elements of building construction 

ISO 834-1：Fire-resisitance tests - Elements of building construction Part 1: general requirements

GB 23864 Standard Test Method for Fire Tests of Penetration Firestop Systems.