BS 476-15：Fire Tests on Building Materials and Structures Part 15: Method of Measuring the Rate of Heat Release of Prod
BS 476-15：Fire Tests on Building Materials and Structures Part 15: Method of Measuring the Rate of Heat Release of Products
BS 476-15 Fire Test to discrete products– Standard ：
BS 476-15：Fire Tests on Building Materials and Structures Part 15: Method of Measuring the Rate of Heat Release of Products
BS 476-15 Fire Test to discrete products– Standard Test：
This test method is used to determine the ignitability, heat release rates, mass loss rates, effective heat of combustion, and visible smoke development of materials and products.
BS 476-15 Fire Test to discrete products– Standard Scope：
This International Standard specifies a method for assessing the heat release rate of essentially flat product exposed to controlled levels of radiant heating with or without an external igniter. The rate of heat release is determined by measurement of the oxygen consumption derived from the oxygen concentration and the flow rate in the combustion product stream. The time to ignition (sustained flaming) is also measured in this test. Products with surface irregularities may be tested according to specific requirements.
BS 476-15 Fire Test to discrete products – Relative Standard ：
ISO 5660-1: Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method)
ASTM E 1354: Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
BS 476: Fire Tests on Building Materials and Structures
EN 13501-1: Fire classification of construction products and building elements- Part1: Classification using data from reaction to fire tests
GB 8624: Classification for burning behavior of building materials and products
AS 1530:Methods for fire tests on building materials，components and structures
NF P 92-504: Safety against fire - Building materials - Reaction to fire tests - Flame persistence test and speed of the spread of flame.
NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test
----------------------------------------------------------------------------------------------------------------------