EN 60332-3-24 Fire test on bunched cables
EN 60332-3-24 Fire test on bunched cables
EN 60332-3-24 Fire test on bunched cables - Standard
EN60332-3-24: 2010-08 Test on Electric and Optical Fibre Cables under Fire Conditions Part 3-24: Test For vertical flame spread of vertically---Mounted bunched wires or cables Category C (IEC 60332-3-24:2000 + A1:2008)
Note: The EN 60332-3-24-2010 standard supersedes EN50266-2-4-2001 standard.
EN 60332-3-24 Fire test on bunched cables - Scope
For cables with d ≥ 12mm
EN 60332-3-24 Fire test on bunched cables - Requirement
For cable diameter ≥ 12 mm; Category C. At the end of the test, the maximum distance of charred part measured and evaluated at the sample of the lower edge of the burner, on both sides of the Have not reached the head height of 2.5 meters.(Refer to EN 45545-2 test standard)
EN 60332-3-24 Fire test on bunched cables - Reference Standard
- EN 45545-2: Fire protection of railway vehicles - Part 2: Requirement for fire behaviors of materials and components
- DIN 5510-2: Preventive fire protection in railway vehicles; Part 2: Fire behavior and fire side effects of materials and parts, classification, requirement and test methods
- DIN EN 50266-2-4:: Common test methods for cable under fire condition—Test for vertical flame spread of vertically-mounted bunched wires or cables –Part 2-4: Procedures –Category C
- EN 60332-3-25-2010 Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D (IEC 60332-3-25:2000 + A1:2008)
- DIN EN 50266-2-5 Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-5: procedures – Category D
- DIN EN 50305: Railway applications. Railway rolling stock cables having special fire performance. Test methods
- DIN EN 60332-1-2: Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame
- DIN EN 61034-1: Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus
----------------------------------------------------------------------------------------------------------------------