CAN/ULC-S102-10: Fire Test for surface building characteristics of building material
CAN/ULC-S102-10: Fire Test for surface building characteristics of building material
CAN/ULC-S102-10 Fire tests on building materials – Standard:
CAN/ULC-S102-10: Standard method of test for surface building characteristics of building material and assemblies.
CAN/ULC-S102-10 Fire tests on building materials–Standard Scope:
This method of test for surface burning characteristics of building materials is applicable to any type of building material that, by its own structural qualities or the manner in which it is applied, is capable of supporting itself in position or may be supported in the test furnace as described in this Standard (see Appendix A) or in a manner comparable to its recommended use.
The following materials shall be tested and classified in accordance to CAN/ULC-S102.2:
A Materials which cannot be tested as described in Clause 1.1 of CAN/ULC-S102 without the use of supporting material that is not representative of the intended installation;
B Materials which, when tested in the manner described in Clause 1.1 of CAN/ULC-S102, melts or drips, or otherwise disintegrates and continues to burn on the floor of the test chamber;
C Materials designed for use in a relatively horizontal position with only its top surface exposed to air; or D Thermoplastic materials.
CAN/ULC-S102-10 Fire tests on building materials–Relative Standard:
- ISO 1182: Reaction to fire tests for products -- Non-combustibility test
- GB/T 5464：Non-combustibility test method of building materials
- BS 476: Fire tests on building materials and structures
- BS 476-7：Fire Tests on Building Materials and Structures Part 7: Method of Test to Determine the Classification of the Surface Spread of Flame of Products
- EN 13501-1: Fire classification of construction products and building elements- Part1:
Classification using data from reaction to fire tests
- AS 1530：Methods for fire tests on building materials，components and structures
----------------------------------------------------------------------------------------------------------------------