CAN/ULC-S114-05: Fire test for determination of Non-combustibility in building materials
CAN/ULC-S114-05: Fire test for determination of Non-combustibility in building materials
CAN/ULC-S114-05 Fire tests on building materials – Standard:
CAN/ULC-S114-05: Standard method of test for determination of Non-combustibility in building materials
CAN/ULC-S114-05 Fire tests on building materials–Standard Scope:
This Standard provides a means of determining the non-combustible nature of elementary building materials. It shall be applied to materials used in the construction of buildings. It does not apply to materials with a decorative or protective coating, or impregnation, or built up of laminations of dissimilar materials. (Adhesives between laminations shall be considered laminations.)
CAN/ULC-S114-05 Fire tests on building materials–sample Size:
All specimens shall be 38 mm wide by 38 mm thick in a cross-section perpendicular to the axis of the furnace, and 50 mm long. Tolerances in each dimension shall be ± 2 mm.
CAN/ULC-S114-05 Fire tests on building materials–Relative Standard:
- ISO 1182: Reaction to fire tests for products -- Non-combustibility test
- GB/T 5464：Non-combustibility test method of building materials
- BS 476: Fire tests on building materials and structures
- BS 476-7：Fire Tests on Building Materials and Structures Part 7: Method of Test to Determine the Classification of the Surface Spread of Flame of Products
- EN 13501-1: Fire classification of construction products and building elements- Part1:
Classification using data from reaction to fire tests
- AS 1530：Methods for fire tests on building materials，components and structures
----------------------------------------------------------------------------------------------------------------------