CAN/ULC-S102-3:Standard method of fire test of light diffusers and lenses.

Article

CAN/ULC-S102-3:Standard method of fire test of light diffusers and lenses.
 
CAN-ULC-S102-3Fire tests on building materials – Standard:
CAN/ULC-S102-3:Standard method of fire test of light diffusers and lenses.
 
CAN-ULC-S102-3Fire tests on building materials–Standard Scope:
This test method is applicable to materials employed in light diffusers and lenses.
 
The testing procedure described herein is intended to assess the propensity of material employed in light diffusers and lenses to fall from its installed position before igniting when subjected to test fire exposure conditions in CAN/ULC-S102, as required in the National Building Code of Canada 2005, Volume 1, Clause 3.1.13.4 1 (b).
 
CAN-ULC-S102-3Fire tests on building materials–Standard conditioning:
The specimens shall have been conditioned uniformly for a period of 5 days in an environment where the temperature is maintained at 23 ± 3°C and at a relative humidity of 50 ± 5%.
 
CAN-ULC-S102-3 Fire tests on building materials–Relative Standard:
ISO 1182: Reaction to fire tests for products -- Non-combustibility test
GB/T 5464:Non-combustibility test method of building materials
BS 476: Fire tests on building materials and structures
BS 476-7:Fire Tests on Building Materials and Structures Part 7: Method of Test to Determine the Classification of the Surface Spread of Flame of Products
EN 13501-1: Fire classification of construction products and building elements- Part1:
Classification using data from reaction to fire tests
AS 1530:Methods for fire tests on building materials,components and structures
 
Copyright EcoSafene  闽ICP备09009213号-1