CAN/ULC-S102-10:Standard method of test for surface building characteristics of building material and assemblies.

 

This method of test for surface burning characteristics of building materials is applicable to any type of building material that, by its own structural qualities or the manner in which it is applied, is capable of supporting itself in position or may be supported in the test furnace as described in this Standard (see Appendix A) or in a manner comparable to its recommended use.

 

A Materials which cannot be tested as described in Clause 1.1 of CAN/ULC-S102 without the use of supporting material that is not representative of the intended installation;

B Materials which, when tested in the manner described in Clause 1.1 of CAN/ULC-S102, melts or drips, or otherwise disintegrates and continues to burn on the floor of the test chamber;

C Materials designed for use in a relatively horizontal position with only its top surface exposed to air; or

D Thermoplastic materials.

 

ISO 1182: Reaction to fire tests for products -- Non-combustibility test

GB/T 5464：Non-combustibility test method of building materials

BS 476: Fire tests on building materials and structures

BS 476-7：Fire Tests on Building Materials and Structures Part 7: Method of Test to Determine the Classification of the Surface Spread of Flame of Products

EN 13501-1: Fire classification of construction products and building elements- Part1:

Classification using data from reaction to fire tests

AS 1530：Methods for fire tests on building materials，components and structures