CAN/ULC-S114-05: Standard method of test for determination of Non-combustibility in building materials

 

This Standard provides a means of determining the non-combustible nature of elementary building materials. It shall be applied to materials used in the construction of buildings. It does not apply to materials with a decorative or protective coating, or impregnation, or built up of laminations of dissimilar materials. (Adhesives between laminations shall be considered laminations.)

 

All specimens shall be 38 mm wide by 38 mm thick in a cross-section perpendicular to the axis of the furnace, and 50 mm long. Tolerances in each dimension shall be ± 2 mm.

 

ISO 1182: Reaction to fire tests for products -- Non-combustibility test

GB/T 5464：Non-combustibility test method of building materials

BS 476: Fire tests on building materials and structures

BS 476-7：Fire Tests on Building Materials and Structures Part 7: Method of Test to Determine the Classification of the Surface Spread of Flame of Products

EN 13501-1: Fire classification of construction products and building elements- Part1:

Classification using data from reaction to fire tests

AS 1530：Methods for fire tests on building materials，components and structures